Advertisement
Economizer outline
Install two (2)
screws into holes.
Leave extended
from unit 1/2"
Figure 6. Start Economizer's Front Mounting Screws
Unit's top sealing
Economizer Rain
Hood
1. Loosen the two
(2) screws to allow
hood to slide under
2. Drive six (6) self
tapping screws into
the unit.
the keyhole openings
on each side of hood
Apply gasket between damper assembly and hood
3. Tighten the two
(2) top screws and
the two (2) side
screws
Figure 7. Mounting Rain Hood
INSTALLER'S GUIDE
Economizer and
Return Air Damper
slides under HVAC
HVAC unit's top
unit's top sealing
HVAC unit
Hood
Detail
5
Advertisement
