IMPORTANT: THE ABOVE CHART IS FOR
REFERENCE ONLY. Check all system component
pressure ratings (coils, valves, pumps, etc.) and any
applicable local or national piping codes prior to
specifying system pressure rating.
A
50-50 Lead-Tin at 200 F
B
50-50 Lead-Tin at 150 F
C
50-50 Lead-Tin at 100 F
NOTES:
1. Not recommended for high system water pressures.
2. Standard factory joint material.
Fig. 49 — Copper Water Tube and Joint Material Pressure Ratings
JOINT MATERIALS
D
Note 1
E
F
54
95-5 Tin-Antimony at 200 F
95-5 Tin-Antimony at 150 F
95-5 Tin-Antimony at 100 F
Note 2