Advertisement
5. Remove the clips on both sides (these clips have key-holes, allowing removal without removing the screw
– see "a" below). Place the rear fireback in position (see "b" below). The side fireback holds the rear
fireback in place – support the rear fireback while installing the side fireback. Place the side firebacks in
position (see "c" below). Secure using the screws and clips removed earlier.
Ledgestone Fireback Orientation – Each Side Has a Notch in the Upper Front Corner
Make sure the firebacks are oriented as shown below (the grout lines and coloring will line up). The side firebacks have
notches in the front upper corners. Arrange the firebacks before installing to verify alignment.
NOTE: How these notches fit with the adjoining fireback.
6 Restore the fireplace to the correct configuration.
Page 3 of 3
864 Fireback Installation
sku# 96100838 – 96100839 - 96100840 – 96100841 – 96100842 - 96100843
a
5/16" Nutdriver
17602072 - 12/16/19
b
c
Travis Industries, Inc.
Advertisement
