Advertisement
3
Remove and
discard the
media tray cover
plates.
4
Remove the
exhaust
restrictor from
the firebox
ceiling (it is
replaced after
firebacks are
installed).
Ledgestone Firebacks Only
The tabs on the media tray must be bent out – see below. You will need to remove the media tray (2 screws hold
it in place) to bend the tabs out.
Page 2 of 3
864 Fireback Installation
sku# 96100838 – 96100839 - 96100840 – 96100841 – 96100842 - 96100843
Bend these tabs
outwards (both sides).
17602072 - 12/16/19
NOTE: These obround holes allow
for the restrictor to be removed
with the screws still in place.
Loosen these 4 screws on
the exhaust restrictor.
The side and back
firebacks rest on top
of these tabs.
Travis Industries, Inc.
Advertisement
