Advertisement
5. Remove and discard both the oil seals from each
bearing housing (Figure 3).
6. Remove and discard the bearing from the left hand
bearing housing.
1. Locknut
2. Counterweight
3. Reel bearing locknut
4. Oil seal
5. Retaining ring
6. Reel bearing
7. Wave washer
8. Tapered nut
9. Bearing housing
10. Thrust washer
7. Remove and discard the 2 retaining rings, bearing, wave
washer, and thrust washer (if installed) from the right
hand bearing housing.
8. Clean the bearing housings.
Figure 3
11. Retaining ring
12. Plow bolt
13. Pitch arm
14. Bushing
15. Bearing journals
3
16. Spacer
17. Spacer
18. Woodruff key
19. Reel drive pully
20. Flange nut
Advertisement
