Led Indication - Panasonic KX-TD816AL User Manual

1.1

LED Indication

The Light Emitting Diode (LED) button indicators provide the line conditions with lighting
patterns.
Flashing light patterns
Slow flash
(60 flash/min.)
Moderate flash
(120 flash/min.)
Rapid flash
(240 flash/min.)
LED Indication on INTERCOM Button
The table below shows the lighting patterns and the intercom line conditions.
INTERCOM button
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
LED Indication on CO Button
The table below shows the lighting patterns and the CO line conditions.
CO button
Off
Green On
Green slow flash
Green moderate flash
Green rapid flash
Red On
Red slow flash
BLF on DSS Button
The Busy Lamp Field (BLF) indicator button is red when the corresponding extension is
busy. This is available for DSS buttons of DSS consoles and for flexible CO buttons
assigned as DSS buttons on proprietary telephones.
1-18
DPT Overview
Configuration
← 1 sec. →
Intercom Line Condition
Idle
Intercom call / Conference established
Intercom call hold
Intercom call exclusive hold / Consultation hold
Incoming intercom/doorphone call
CO Line Condition
Idle
I-use
I-hold
I-exclusive hold / CO-to-CO call /
Conference, Unattended
Hold Recall / Incoming call
Other-use
Other-hold
*
— Item with is available at Single-CO button only.
*