Cabling Overview - Studer Xtender-WeCo 5k3 Quick Installation Manual

Cabling Overview

Overall Connection
Remove the plastic Cover from the bottom side of the Xtender Inverter and remove
the front cover of the RCC-02 (1 screw)
Remove the back cover of the Xcom-CAN (2 back screws)
A- CAN Port 1 of the Inverter (Connects to RCC-02 Port-1)
B- CAN Port 2 of the Inverter (Connects to Xcom COM Port-1)
C- CAN Port 1 of Xcom-CAN Connects to the battery CAN RJ45
C
A B
B
A
WeCo www.wecobatteries.com