Time + Alarm Back-Up; Snoozing; Dismissing The Alarm - Philips HF3650 User Manual

English
12
Type of sound

Time + alarm back-up

Snoozing

Dismissing the alarm

The default duration of the wake-up curve (brightness increase to the set
maximum light intensity) is 30 minutes. Press icon
duration of the wake-up profile to your preference.
Press + or - to increase or decrease the brightness of the light in the wake-
up curve.
Press this icon to open the sounds menu to set the sound of the wake-up
profile.
1 Press the toggle icon
natural sound, radio or no sound.
2 Press the natural sound icon
press the radio icon
3 You can set the volume with the loudspeaker icon
In the event of a power failure, all functions of the appliance, including
the display, do not work. However, the internal clock and a back-up alarm
remain active for at least 8 more hours.
If during the power failure the set alarm time is due, a back-up alarm goes
off generating a beeping sound for approximately 30 seconds.
When the wake-up curve has ended (when the set maximum light
intensity has been reached) and the alarm sound is playing, you can tap
the top of the appliance to snooze.
The lamp stays on, but the sound is muted. After 9 minutes, the alarm
sound starts playing again.
Note: The light and sound automatically turn off 60 minutes after the
alarm has gone off or 60 minutes after the last snooze action.
When the wake-up curve is active or the alarm goes off, you can dismiss it
by pressing this icon on the appliance. If you dismiss the alarm, the alarm
profile is deactivated for that day.
to choose one of the three sounds options: a
to select one of the natural sounds or
to select one of the radio presets.
to change the
.