Operating Multiple In/Outdoor Units Simultaneously (Group Control); Miscellaneous Settings - Panasonic CZ-RWS3 Operating Instructions Manual

Operating Multiple In/Outdoor Units Simultaneously
(Group control)
Group control works
well for providing air
conditioning to 1 large
room with more than 1 air
conditioning units.
• 1 remote controller can
operate up to 8 indoor
units.
• All the indoor units have
identical settings.
• Set temperature sensing
to the indoor unit (Main
sensor). (See page 8)

Miscellaneous Settings

A variety of changes can be made to settings, depending on the indoor unit
being used.
Operation mode indicator, time display (24-hour, AM/PM),
heating maximun temperature
• These settings are saved in nonvolatile memory in the remote controller, so
even when its batteries are changed, the settings do not have to be made
again.
• First check the display of the remote controller when the unit is stopped and
then make any desired settings.
28
(EN)
Receiver
Infrared remote controller
Outdoor unit
Indoor unit
Signal line