Temperature Automatic Return - Panasonic CZ-RWS3 Operating Instructions Manual

Temperature Automatic Return

You can restore the changed temperature to the originally set temperature
automatically after a specified time elapses.
• Set the time and temperature for each operation mode.
1. Press
same time for 4 seconds or
longer.
• " " starts blinking and the
setting screen is displayed.
2. Press
operation mode, then press
.
• Every time you press
switch between "Dry / Cool
→ Heat → Auto
buzzer sounds from the
corresponding receiver.
When not set: 1 short beep
•
When already set: 2 short
•
beeps
3. Press
to return to the set
temperature.
• Setting range: 10 to 240 min (by
the 10 min)
4. Press
temperature, then press
Auto
Heat
Dry / Cool
• The temperature range that can be set varies depending on the model.
5. Press
• You can return to Step 2 to continue setting if you press
.
24
(EN)
and at the
to select the
", the
/ to set the time
/ to set the
MAX (°C) MIN (°C)
27
30
30
.
Operation mode
to
1, 3
.
17
16
18
Temperature
Time
(min)
1, 4
2
2, 5
6
instead of