Pentax MZ-S Service Manual page 34

***** MAIN MENU *****
***** NUMBER OF REPAIRS
NUMBER OF REPAIRS = 0 - - - > 1
IF YOU ARE READY TO START,
WHEN YOU RETURN TO FRONT MENU,
NEXT OF EEPROM CHECKING (END) ---> [ 1 ]
***** BATTERY LEVEL ADJUSTMENT
SET REGULATED DC POWER SUPPLY TO 6 v.
AFTER CONFIRMING ABOVE,
WHEN YOU RETURN TO FRONT MENU,
***** BATTERY LEVEL ADJUSTMENT
* SET REGULATED DC POWER SUPPLY TO 4.40 v.
AFTER CONFIRMING ABOVE,
WHEN YOU RETURN TO FRONT MENU,
[ 4 ]NUMBER OF REPAIRS
*****
PRESS KEY [ Y ].
PRESS KEY [ N ].
*****
PRESS KEY [ Y ].
PRESS KEY [ N ].
*****
( MORE THAN 3 AMPERE )
PRESS KEY [ Y ].
PRESS KEY [ N ].
27640 -33/34-
[ 6 ]BATTERY LEVEL ADJUSTMENTT
***** SHUTTER SPEED ADJUSTMENT
* SET DRIVE MODE SAW OF CAMERA
TO CONSECUTIVE-FRAME MODE.
SHUTTER TESTER FOR 1/6000 SEC.
SHUTTER TESTER (MODEL EF-5000)
MAIN MENU
1) SET CAMERA ONTO SHUTTER TESTER.
2) OPEN BACK COVER OF CAMERA.
3) DEPRESS BACK COVER KEY.
4) SET SHUTTER DIAL TO 6000
5) SET FOCUS MODE SW TO MF.
RELEASE SHUTTER SEVERAL TIMES.
READ SHUTTER SPEED.
AFTER CONFIRMING ABOVE,
WHEN YOU RETURN TO FRONT MENU,
INPUT SHUTTER SPEED READING (1/6000)
DATA = ?
(WHEN YOU RETURN TO FRONT MENU,
[ N ] & RETURN/ENTER KEY.)
DO SHUTTER SPEED ADJUSTMENT AGAIN.
*****
* MOUNT THE FOCUS MASTER LENS ONTO CAMERA.
AFTER CONFIRMING ABOVE,
WHEN YOU RETURN TO FRONT MENU,
*****
NOW, ALL AF SENSORS ARE OPERTING.
* DO NOT REMOVE THE LENS FROM CAMERA.
COMBINATION OF FI CHECKING;
1) USE VERTIVAL CHART WHEN CHECKING AF FRAME.
2) USE HORIZONTAL CHART WHEN CHECKING
UNDER ABOVE CONDITION, CHECK FOCUS INDICATION.
WHEN YOU RETURN TO FRONT MENU,
[ 6 ] SHUTTER SPEED ADJUSTMEN
FOCUS INDICATION CHECKING
*****
---> [ 1 ]
---> [ 2 ]
---> [ 3 ]
PRESS KEY [ Y ].
PRESS KEY [ N ].
(mS)
FI CHECKING *****
PRESS KEY [ Y ].
PRESS KEY [ N ].
FI CHECKING *****
RIGHT & LEFT TRAME.
PRESS KEY [ Y ].
[ 6 ]