Panning (Pan) - Garmin 80 Quick Reference Manual

Moving Map (MAP)
Press MAP
1. Turn the Large knob to view the map pages.
(1 to 4). The Nav Data area on the left side of
the display can be customized in Map pages
2 - 4.
2. Turn the Small knob to change the map scale.
3. Press the Menu/Enter
available line selection keys for Map mode.
Press the line selection key next to the menu
item for that choice.
4. Press the More key to advance to the next list
of menu items. Press the
to make the list go away or just wait for a few
seconds.
Menu Items
Solid reversed means ident,
Airports, VORs,
and symbol are displayed. A
NDBs,
bold outline means only symbol
Intersections,
is displayed. A thin outline
User Wpts, Lo
means item not displayed.
and Hi Airways
Solid reversed means airspace
Airspace
outline and sector lines are
shown. A bold outline means
airspace outline only displayed.
A thin outline means airspaces
are not displayed.
Map pages 2-4. Toggles display
Flight Plan
of flight plan route line.
Toggles display of labels and icons
Declutter
on/off at higher zoom levels.
Checklists
1. Press the FN key and then the
2. Press NEW . Press the
use the Large and Small
and then press Menu/Enter
3. Press EDIT .
4. Turn the Large knob to advance. Turn the
knob to select items. You may also press the
CRSR knob and create your own.
5. Press Menu/Enter when finished editing.
key to show the
Menu/Enter key again
Description
CHK smart key.
CRSR knob in and then
knobs to name the list
.
Small
Customizing Nav Data
1. Press Map , then turn the
pages 2 - 4.
2. Press Menu/Enter , then press the
selection key until the
3. Press Nav Data to toggle the display of the
standard default or your customized Nav Data.
4. Press Sel Data (the
highlighted).
5. You can know customize the Nav Data on the
left side of display. Turn the
move to the item to edit. Turn the
to change the item.
6. Press Sel Data or Menu/Enter
changes.

Panning (PAN)

1. Press FN and then the
press the MAP key and then press the
button on the Small
2. Your present position is in the center of the
display. You can move
with the Large and Small knobs
Lat/Lon, range, and bearing from your present
position to the crosshair is shown at the
bottom of the display. A green line is drawn
from your present position to the crosshair
location.
3. Turn the Large knob to move the crosshair
North/South.
4. Turn the Small knob to move the crosshair
East/West.
5. Press the Range line selection key and then
turn the Small knob to change the map scale.
Press Range again to return to crosshair
control.
6a. When the crosshair is near a waypoint, the
waypoint will turn green. Press
information about that waypoint.
Or
6b. Press D-> to fly Direct-To that waypoint.
Creating a User Waypoint in Pan Mode
1. Press the MRK line selection key.
2. Use the Large and
information about the new User waypoint.
3. Press Menu/Enter to save the User waypoint.
Large knob to Map
More line
Nav Data key is shown.
Nav Data key must be
Large knob to
Small knob
to save your
PAN smart key or
CRSR
knob.
the white crosshair
. The
INFO to view
Small knobs to enter