User Waypoints (User); System Mode - Garmin 80 Quick Reference Manual

User Waypoints (USER)

Creating a User Waypoint in User Mode
1. Press FN and then the
2. Use the Large and Small
information about the new User waypoint.
3. Press Menu/Enter to save the User waypoint.
Searching for a User Waypoint in User Mode
1. Press FN and then the
2. Press the Search key.
3. Press the CRSR button on the
highlight the User waypoint name and then
turn the Small knob to search through the list
of User waypoints.
Editing a User Waypoint in User Mode
1. Press FN and then the
2. Press the Edit key.
3. Use the Large and Small
information about the new User waypoint.
4. Press Menu/Enter to save the User waypoint.
Deleting a User Waypoint in User Mode
1. Press FN and then the
2. Search for the User waypoint you want to
delete as described above.
4. Press CLR to delete the displayed User
waypoint.
Direct-To A Waypoint Not In Your Flight Plan
1. Press DIRECT-TO (D->)
2. Press the DB smart key.
2. Use Large & Small
ident or name.
4. Press Dest and Menu/Enter
the selected waypoint.
5. To set an approach, press
6. Use the Large and Small
approach and press
EXEC and Menu/Enter
Direct-To A Waypoint In Your Flight Plan
1. Press DIRECT-TO .
2. Press the WPTS smart key.
2. Use Large knobs to select the
flight plan .
4. Press Direct . The CNX80 will navigate direct to
the selected waypoint.
User smart key.
knobs to enter
User smart key.
Small knob to
User smart key.
knobs to enter
User smart key.
.
knobs to select waypoint
. Now, fly direct to
PROC then Appch
knobs to select the
Menu/Enter . Now press
.
waypoint in the

System Mode

Press the FN key and then the
reach the System Mode.
Press the GPS VERS ,
GPS
GPS/WAAS status, GPS Time, satellites
available with overhead view, and signal strength
of available satellites are shown.
VERS (Software Versions)
Unit serial number and software versions are
shown. This information should be noted before
calling Customer Service.
CNFG (User Configuration)
The User Configuration function allows you to
set values for your particular aircraft.
1. Turn the Large
2. Press the CRSR
Small knob to change the value.
3. Press the Menu/Enter
Nearest Waypoint Search (NRST)
1. Press NRST.
2. Press the Line Selection key on the right side
of the display to select waypoint type.
3. Turn the Large
4. Use next steps below to:
Find Nearest Frequency
1. Frequency is listed with waypoint info.
2. Press <SBY to insert displayed waypoint
frequency into Standby frequency position or
<-A-> to insert into the Active position.
Fly Direct to Nearest Waypoint
1. Highlight (green) desired waypoint with the
.
Large knob.
2. Press D-> then press the
selection key or press
waypoint your new destination.
Find Info on Nearest Waypoint
1. Highlight (green) desired waypoint with the
Large knob.
2. Press INFO, then press the desired line
selection keys for more info.
3. Press INFO again to return to the previous
view.
SYS smart key to
, or CNFG smart keys.
knob to highlight the value.
knob in and then turn the
key to save the value.
knob to view nearby waypoints.
Direct line
Dest to make the