Console server management switch & console server with poweralert (224 pages)
Summary of Contents for Tripp Lite N48M Series
Page 1
N48M/N48S 1U Series Este guía está disponible en español en la página de Tripp Lite: tripplite.com/support Ce guide est disponible en français sur le site Web de Tripp Lite : tripplite.com/support Русскоязычная версия настоящего краткого руководства представлена на веб-сайте компании...
Page 2
Installation Materials Needed: • Phillips Screwdriver • Rack-Mounting Screws Connector Type: Fiber Panel Model Connector 1 Connector 2 N48S-8L2L-10 LC/UPC Male LC/UPC Male N48S-6L8L-10 LC/UPC Male LC/UPC Male N48S-4L16L-10 LC/UPC Male LC/UPC Male N48S-2L24L-10 LC/UPC Male LC/UPC Male N48S-2L24L-20 LC/UPC Male LC/UPC Male N48S-4M3X8M-10 MTP-MPO/APC Female...
Page 3
Installation Place the panel into position in an enclosure or open-frame rack. Align the mounting holes and use rack-mounting screws (2 per side, not included) to secure the unit. To access the LC or MTP-MPO cables, untighten two snap rivets and pull out the tray. Note: The tray will be tilting down.
Page 4
Installation Locate the appropriate LC or MTP-MPO cable. Remove the Velcro strap, then uncoil and pull cable, as required. Note: Excess cable slack can be recoiled inside the panel. Preloaded 1U Panel Available front-to-rear cable access Cables are labeled per port in meters 1111 W.