Enable Approach (Gx50/60 Only); Disable Approach (Gx50/60 Only); Flight Plan Comments - Garmin Apollo GX 50 User Manual

Enable Approach (GX50/60 Only)

This option is available on the Flight Plan home page
when an approach is already loaded, but not enabled,
and you are within approximately 30 nm of the
destination airport. Press
approach.

Disable Approach (GX50/60 Only)

This option is available on the Flight Plan home page
when an approach is already loaded and enabled.
Press
mode and return the GX50/60 to Terminal flight
mode.
Destination
Normal waypoint information about the destination
Waypoint
waypoint can be viewed by pressing
Information
Plan Name Page is displayed. This is the same as
pressing
waypoint, except that the Plan Comment page is
available by turning the
Flight Plan A flight plan comment page can be viewed and edited
Comments
for each flight plan by pressing
Name Page is displayed and the turning the
knob.
If no plan comment has been entered, press
create one.
*Active* 56.1nm
Dest Wpt: PDX
Enable Approach?
to cancel the Approach Transition flight
ENTER
*Active* 56.1nm
Dest Wpt: PDX
Disable Appr?
to view information about a TO
INFO
PDT AIRPORT
Public
elev 1493ft
Flight Plan Functions
to enable the
ENTER
INFO
knob.
SMALL
when the Plan
INFO
when the
LARGE
to
SEL
6-23