Chapter 9 Startup Using V-Tool
9.1 Outline of Operation
9.1.1 Module Setting
The modules that can be set using V-Tool is as follows (Refer to Figure 9-1).
(1) FL654 that connected V-Tool directly
(2) Remote I/O station via FL-net (FL654 or FL754)
FL754 ... model 3000 FL-net Remote I/O station
9
FL654 cannot be set by way of FL-net by connecting V-Tool with FL612 or FL312 module.
The item that can be set by V-Tools is as follows.
(1) FL-net transmission parameter of FL654
(2) Registration of I/O module
(3) Allocation of I/O module data to FL-net common memory
44
S2PU
FL612
FL654
I/O modules
(1)
V-Tool
computer
Fig 9-1 module setting using V-Tool
FL-net network
(2)
FL654
or
FL754
Caution
Model 2000 FL-net (OPCN-2) Remote I/O Station Module (FL654) User's Manual
I/O modules