Hamilton Beach Stack & Snap Duo Manual page 10

How to Use Plastic Dough Blade
NOTE: Operate using only one
Blade or Disc at a time.
10
1. Place Large Bowl on Base. Slide
Dough Blade straight down onto
Motor Shaft and add dry ingredients.
4. Add liquid slowly through two small
holes at bottom of Small Food
Pusher, and follow recipe.
2. Place Lid on Large Bowl and push Lid
Latches down until they snap in place.
NOTE: Food Processor will not work
unless Latches on Bowl are locked
and Food Pusher is in place.
5. When finished, press OFF ( ) and unplug. 6. Lift up Lid Latches to remove Lid.
3. Plug into outlet. Press PUREE/KNEAD
button.
Lift straight up on Dough Blade and
remove food.