As you pan around the map, you'll notice that the target crosshair will "snap" to
on-screen waypoints and highlight the waypoint name (Fig. 63a). Once a waypoint
name is highlighted, you can review its waypoint definition page or execute a GOTO
function right from the map page (Fig. 64b).
To review the definition page for a waypoint highlighted on the map
page:
1. Press ENTER.
To GOTO a waypoint highlighted on the map page:
1. Press GOTO.
2. Press ENTER to confirm the GOTOwaypoint page.
To stop the panning function:
1. Press QUIT.
REFERENCE
Fig. 63a
Fig. 63b
63