Wiring (Inside The Electrical Equipment Rack) - JUKI PS-800-8045 Instruction Manual

Cable entrance

4. Wiring (inside the electrical equipment rack)

[Standard type and the laser type]
⑥ ⑥
1) Connect AT solenoid cable ② and AT SOL cable asm. A ⑦ to the AT SOL PCB asm. ⑥ in the elec-
trical equipment rack.
IN6/IN7
2) Insert the pin contact of the black wire (GND) of AT SOL cable asm. A ⑦ into IN6/IN7 connector pin
No. 4.
3) Connect AT SOL cable asm. A connector ⑦ to the loose line / LOOSE connector of the electrical
control box.
3) Pull AT solenoid cable ② into the electrical
equipment rack through cable entrance of the
rack.
② ②
Pin No. 4
Loose thread
– 6 –
⑥ ⑥
⑦ ⑦
GND
LOOSE
24V