Table of Contents
Advertisement
A damaged rangetop can be dangerous. Always check for visible
signs of damage. Never use a damaged appliance.
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronized
with the grid power supply (e.g., island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN 50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronized with the grid power supply, or these measures must be
replaced by equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2.
The electrical safety of the rangetop can only be guaranteed when
it is properly grounded. Compliance with this essential safety
requirement is absolutely mandatory. If in any doubt, please have the
building's wiring system inspected by a qualified electrician.
Proper installation: Make sure that your appliance has been installed
correctly and that it has been grounded by a qualified technician.
Do not operate the appliance until it has been properly installed.
To avoid damaging the rangetop, make sure that the information
(voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.
Installation and maintenance of the gas connection must be
performed by qualified installers, service agencies or gas providers.
Do not use a power strip or extension cord to connect the
rangetop to electricity (risk of fire).
This appliance must not be installed and operated in non-
stationary locations (e.g., on a ship).
IMPORTANT SAFETY INSTRUCTIONS
7
Advertisement
Table of Contents
