Troubleshooting - Zoom F8n Pro Quicktour

Troubleshooting

There is no sound or output is very quiet
→ Check the headphone connection.
→ Confirm that the headphone volume of the F8n
Pro is not lowered.
Sound from a mic or connected equipment
cannot be heard or is very quiet
→ Check the orientation of the mic or the volume
settings of the connected equipment.
→ Check the F8n Pro input level (trim) settings.
→ Check the F8n Pro fader settings.
→ Check the F8n Pro headphone volume.
→ Check the F8n Pro phantom power settings.
Recording is not possible
→ Confirm that the status indicator is lit red.
→ Confirm that the SD card has open space.
→ Confirm that an SD card is loaded properly in a
card slot.
→ If "Card Protected!" appears on the display, the
SD card write-protection is enabled. Slide the lock
switch on the SD card to disable write-protection.
Product names, registered trademarks and company names in this document are the property of their respective companies.
Windows is a trademark or registered trademark of Microsoft
®
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
Not recognized by computer when
connected
→ Confirm that the USB cable being used is not
designed only to provide power.
→ The operation mode must be set on the F8n Pro
to allow the computer to recognize it.
→ A driver is necessary for use as an audio interface
with Windows. Download the driver from the
ZOOM website (zoomcorp.com).
Corporation.
®
zoomcorp.com
Z2I-4471-01