Table of Contents
Advertisement
Charging the Earphones
Red LED indicates low battery.
1.
Connect earphones to charging device using supplied cable.
2.
LED is red while charging.
3.
When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
Specifications
Bluetooth Specifications
Antenna Information
•
Type = Chip
•
Gain = +2.13 dBi
Bluetooth 4.1
•
Operating frequency = 2402MHz-2480MHz
•
Modulation scheme = FHSS
•
RF power = +5.38dBm (E.I.R.P.)
Battery Type
RMCE-BT1
RMCE-BT2
Nominal Voltage
RMCE-BT1
RMCE-BT2
Battery Life
RMCE-BT1
RMCE-BT2
Total Battery Life
RMCE-BT1
RMCE-BT2
Rechargeable Li-Ion
Rechargeable Li-Ion
3.7 V DC
3.7 V DC
up to 8 hours
up to 10 hours
120 mAh
200 mAh
Shure Incorporated
5/10
Advertisement
Table of Contents
