Table of Contents
Advertisement
Daily use
Warning! Refer to Safety
chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate
the hob.
Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on the
control panel for more than 10 seconds (a pan,
a cloth, etc.). An acoustic signal sounds and the
hob deactivates. Remove the object or clean
the control panel.
• the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or change
the heat setting. After some time
and the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
10
comes on
The hob deactivates
after
6 hours
5 hours
Heat setting
5
6 - 9
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. Touch
at the same time to deactivate the cooking zone.
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for some
time and then decreases to the correct heat
setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
touch
(
comes on). Immediately touch
until the correct heat setting comes on. After 3
seconds
comes on.
To deactivate the function: touch
Power function
This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone only
for a limited period of time. After this time the
The hob deactivates
after
4 hours
1.5 hour
and
comes on). Immediately
.
Hob User Manual
Advertisement
Table of Contents
