Storing The Machine - Stihl MS 382 Instruction Manual

22 Storing the Machine

1
► Loosen the twist lock (2) in the direction of the
arrow.
► Remove the carburetor box cover (3).
► Pull off the spark plug boot.
► Unscrew the spark plug.
21.2 Checking the Spark Plug
► Clean dirty spark plug.
0458-562-8721-B
3
2
A
► Check electrode gap (A) and readjust if neces‐
sary – see "Specifications".
► Rectify the problems which have caused foul‐
ing of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
WARNING
Arcing may occur if the adapter nut (1) is loose
or missing. Working in an easily combustible or
explosive atmosphere may cause a fire or an
explosion. This can result result in serious inju‐
ries or damage to property.
► Use resistor type spark plugs with a properly
tightened adapter nut.
21.3 Installing the Spark Plug
► Screw home the spark plug, fit the boot and
press it down firmly.
► Fit the carburetor box cover.
22 Storing the Machine
For periods of about 30 days or longer
► Drain and clean the fuel tank in a well-ventila‐
ted area.
► Dispose of fuel properly in accordance with
local environmental requirements.
► If a manual fuel pump is fitted: Press the man‐
ual fuel pump at least 5 times.
► Start the engine and run it at idling speed until
it stops.
► Remove saw chain and guide bar; clean and
spray with protective oil
► Thoroughly clean the machine - pay special
attention to the cylinder fins and air filter
► When using biological chain oil (e.g. STIHL
BioPlus), fill the lubricant oil tank
► Store the machine in a dry and secure location
Keep out of the reach of children and other
unauthorized persons
English
1
71