Measure Volume
On the AR Measure screen, go to Objects >
manual measurements are supported.
If the
icon cannot be found in the viewfinder, it means that your phone does not
•
support automatic volume measurements.
Currently, only the volume of cubes and cuboids can be measured.
•
Make sure the object is not placed against a wall and there is a distance of 1 to 1.5 m
•
(3.3 to 5 ft.) between your phone and the object.
Manually measure volume
1
If your phone supports automatic measurements, touch
Frame the surface on which the object is resting in the viewfinder and slowly move your
phone to locate the plane.
2
When the plane is identified, move your phone to point
and touch
to add a starting point.
3
Move your phone slowly so that
reaches the end. Then touch
4
Move your phone to create a frame for the bottom of the object. When the frame
matches the bottom length and width of the object, touch
5
Move your phone to create a frame for the whole object. When the frame matches the
size of the whole object, touch
Your phone will automatically display the result.
6
Drag the tips of the object to fine-tune the measurement result.
Automatically measure volume
1
On a phone that supports automatic measurements, touch
mode is enabled. Frame the object in the viewfinder and slowly move your phone to
locate the plane.
2
When your phone identifies the plane and recognizes the object, a frame will be displayed
automatically. Then touch
Your phone will automatically display the result.
3
Drag the tips of the object to fine-tune the measurement result.
Audio Control Panel
or touch Volume. Both automatic and
travels along the long edge of the object until it
.
.
.
Smart Features
to disable auto mode first.
at the object's bottom edge
.
and make sure that auto
62