Fiat 500X Owner's Handbook Manual page 250

app once the Bluetooth® pairing has
been completed.
Setting the Uconnect™ LIVE
services with the aid of the
Uconnect™ system
Through the Uconnect™ LIVE
services you can access the "Settings"
section by pressing the
can then check the system options
and change them according to your
preferences .
System updates
If an update for the Uconnect™LIVE
is available while the Uconnect™LIVE
services are being used, the driver will
be informed with a message on the
radio.
Connected services that can be
accessed on the car
The my:Car application was developed
to improve the driving experience and
can be used in all markets where
the Uconnect™ LIVE services are
accessible.
On Uconnect™ 7" HD Nav
LIVE versions, the access to
Uconnect™LIVE services enables the
use of "LIVE" services.
eco:Drive™
The eco:Drive™ application allows
you to display your driving behaviour in
real time, in order to help you achieve
248
a more efficient driving style as far
as consumption and emissions are
concerned.
It is also possible to consult the data on
the Uconnect™ LIVE App.
Driving style is evaluated by means of
four indices which monitor the following
parameters:
icon. You
Acceleration
Deceleration
Shifting
Speed
eco:Drive™ display
Press the eco:Drive™ graphic button
to interact with the function. A screen
will be displayed showing the 4 indices
described above.
These indices are grey until the system
has enough data to evaluate the
driving style. Once sufficient data are
available, the indices will have 5 colours
depending on the evaluation: dark
green (very good), light green, yellow,
orange and red (very bad).
In the event of extended inactivity the
display will show the average of the
indices up to that moment ("Average
index") then the indices will be coloured
again in real time as soon as the car is
restarted.
IMPORTANT Do not unpair
the smartphone from the
Uconnect™LIVE App before the
system has downloaded the data,
otherwise it could be lost. During
the transfer of data to the devices,
messages may appear on the
Uconnect™display to guide the user
correctly through the operation; follow
these instructions. These messages
are only displayed with the ignition
device at STOP and when a delay in
the Uconnect™ system switching
off is set. The data are automatically
transferred to the devices when the
engine is switched off. Transferred
data will be deleted from the system
memory in this manner. You can
choose whether to store the trip data
or not by pressing the "Settings" button
and setting storage activation as
desired.
my:Car
my:Car allows you to keep the
condition of your car always under
control. The my:Car application is
capable of detecting malfunctioning in
real time and lets the driver know about
the expiry of maintenance coupons.
To interact with the application, press
"my:Car" button: a screen will appear
on the display showing the "care:Index"
section which contains detailed
information on car status. Press the
"Active warnings" graphic button to
show the details of any faults on the car