Fiat 500X Owner's Handbook Manual page 245

Hide thumbs Also See for 500X:
Table of Contents

Advertisement

SWITCHING THE SYSTEM
ON/OFF
The system is switched on/off by
pressing the button/knob
.
Turn the button/knob clockwise
to increase the radio volume or
anticlockwise to decrease it. The
electronic volume adjustment control
rotates continuously (360°) in both
directions, without stop positions.
TOUCHSCREEN
FUNCTION
The system uses the touchscreen
function; to interact with the different
functions, press the graphic buttons
displayed.
Confirming a selection: press the
"OK" button.
To go back to the previous screen,
press the (Delete) button
or,
depending on the active screen,
Done.
RADIO MODE
After the desired radio station is
selected, the following information is
shown on the display:
At the top: the list of radio stations
stored (preset) is displayed; the station
currently playing is highlighted.
At the centre: the name of station
being listened too is displayed.
On the left side: the "AM", "FM",
"DAB" (for versions/markets, where
provided) buttons to select the desired
frequency band are displayed (the
button corresponding to the selected
band is highlighted).
On the right: display of the following
buttons:
"Info": additional information on the
source being listened to;
"Map": navigation map view (versions
with Uconnect™ 7" HD Nav LIVE
only).
At the bottom: display of the following
buttons:
"Browse": list of the radio stations
available;
/
: selecting previous/next
radio station;
"Tune" : manual radio station tuning;
"Audio": access to the "Audio
Settings" screen.
/
Audio menu
To access the "Audio" menu press the
Audio" graphic button located at the
bottom of the display.
The following adjustments can be
carried out using the "Audio" menu:
"Balance & Fade" (left/right and
front/rear audio balance adjustment)
"Equaliser" (for versions/markets,
where provided)
"Speed Adj Volume" (speed-
dependent automatic volume control)
"Loudness" (for versions/markets,
where provided)
"AutoPlay"
"Auto-On Radio"
MEDIA MODE
Press the "Media" button to select the
desired audio source among those
available: USB and Bluetooth ® .
IMPORTANT Applications used
on portable devices may be not
compatible with the Uconnect™
system.
After Media mode is selected, the
following information is shown on the
display.
At the top: information on the track
being played and the following graphic
buttons:
"Repeat": to repeat the track being
played
"Shuffle": to play the tracks in
random order
Track progress and duration
In the middle: information on the track
being played.
On the left: display of the following
buttons:
Selected device or audio source
"Select Source": select the required
audio source
On the right: display of the following
buttons:
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents