Fiat 500X Owner's Handbook Manual page 247

194
IMPORTANT After using a USB
recharging socket, disconnect the
device (smartphone), always removing
the cable from the vehicle socket first,
never from the device (example in
fig. 194). Cables left flying or connected
incorrectly could compromise correct
recharging and/or the USB socket
condition.
The Uconnect™ system may not
support some USB keys: in this case,
it may not automatically switch from
"Radio" mode to "Media" mode.
If the device used does not play,
verify its compatibility by selecting
Media mode: a dedicated message will
appear on the Uconnect™ system
display.
NOTE The USB ports handle
data transmission from the Pen
Drive/Smartphone, etc. and slow
recharging of an external device, which
is not guaranteed as it depends on the
device type/brand.
USB charge port
(where provided)
Some versions have a USB charging
port on the central console fig. 195.
F1B0754
195
PHONE MODE
Phone mode activation
Press the "Phone" button on the
display to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic dial pad on the display);
display and call the contacts in the
phonebook of the mobile phone;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio device
to make access and connection easier
and quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the car's sound system; the
system automatically mutes the radio
when the Phone function is used.
Pairing a mobile phone
IMPORTANT Carry out this operation
only with car stationary and in safe
conditions; this function is deactivated
when the car is moving.
F1B0753
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
activate the Bluetooth® function on
the mobile phone;
press the "Phone" graphic button on
the display;
if no phone is paired with the system
yet, the display shows a dedicated
screen;
access "Settings" and select "Add
device" to start the pairing procedure,
then search for the Uconnect™ device
on the mobile phone;
245