Auto Clock Set Feature; Setting The Time Zone - GE VG2052 User Manual

SETTING UP THE VCR

Auto Clock Set Feature

The Auto Clock Set feature is set to ON at the factory. In the ON
setting, the VCR looks for a channel carrying XDS (Extended
Data Services) information. XDS updates the clock using the
Coordinated Universal Time. There are certain steps that are
required, such as Auto Channel Search, setting the Time Zone,
and Daylight Saving feature before the Auto Clock feature
works.

Setting the Time Zone

1. Press MENU on the remote to display the VCR MAIN MENU.
VCR MAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Language
0 Exit
2. Press 2 to display TIME menu.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
4 Set Daylight Savings
XDS Time Data was
found on channel 20.
0 Exit
3. Press 3 to display the SET TIME ZONE menu.
SET TIME ZONE
What is your Time Zone?
1 Eastern
2 Central
3 Mountain
4 Pacific
5 Alaska
6 Hawaii
7>Automatic
Press MENU to continue
ON
Auto Clock Information
With a cable box, the VCR will not
reset the clock after a power outage
unless the cable box is turned on to
the channel carrying the XDS signal.
If AUTO CLOCK SET is unsuccessful,
try tuning the VCR (or cable box) to a
channel carrying the broadcast
information (usually PBS), then turn
the VCR off. If the time does not set
within ten minutes, set the time and
date manually through the menu.
Check your local cable system or TV
stations for availability of channels
with XDS.
13