Back Panel; Indicator Panel - GE VG2042 User Manual

APPENDIX A: REFERENCE

Back Panel

AUDIO VIDEO
OUT
IN 1
3 CH. 4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using the
ANT .IN and RF OUT jacks.
AUDIO and VIDEO IN Jacks Receives signals from another
component, like a VCR or camcorder, when it is connected to
these jacks. Use INPUT on the remote to select.
AUDIO and VIDEO OUT Jacks Sends signals from VCR to
another component, like a TV or VCR, when it is connected to
these jacks.
IN FROM ANT. Jack Receives a signal from an antenna or
cable system when attached.
OUT TO TV Jack Passes signal to TV using the cable supplied.

Indicator Panel

POWER VCR
POWER Indicator Lights when the VCR is turned on.
RECORD Indicator Lights when the VCR is recording.
TIMER Indicator Lights during an express or timer recording, or
when the VCR is set for a timer recording and the VCR is turned off.
Flashes when a timer recording is set, and there is no cassette in
the VCR, and when the clock is not set.
VCR Indicator (Applies Only if the VCR Viewing Channel is 3
or 4). Press the TV•VCR button to turn on or off.
• VCR indicator on: Picture from VCR.
• VCR indicator off: Picture from TV channel.
IN FROM
ANT.
VHF/UHF
OUT TO TV
3 CH. 4
TIMER RECORD
47