Tv Function Buttons - GE VG2042 User Manual

VCR BASICS
MENU Brings up VCR MAIN MENU on the TV screen.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 – – appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR off.
RECORD Starts VCR recording. Also used for express
recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH Displays Index, Zero, and Blank Search menus on TV
screen.
SLOW + and – Used for slow-motion playback. Press + to
increase the speed or – to decrease the speed.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the current VCR function such as record, playback,
rewind, or fast forward.
TRACKING Up or Down Lets you manually reduce the
streaks that may appear on the picture during play, slow motion,
or pause. Reduces picture "jitter" during stop-action playback.
TV•VCR Switches the picture signal so that it either comes
from the VCR or cable/antenna system.

TV Function Buttons

CHAN Up or Down Selects next higher or lower channel in
the TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the TV's status displays on the TV screen.
MUTE Reduces volume to minimum level.
TV Function Buttons
The TV buttons may not control all
features of all models of GE, RCA,
and ProScan TVs.
19