Requirements; Procedure - HP StorageWorks NAS b2000 v2 Quick Start Manual

Plankton_book.book Page 37 Monday, February 3, 2003 4:06 PM

Requirements

Procedure

NAS b2000 v2 Quick Start Guide
All manuals and user guides at all-guides.com
Figure 10: Serial number location
The following items are required to run the WebUI configuration application:
Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same
■
segment as the NAS b2000 v2
■ DHCP-serviced network
■ Serial number of the NAS b2000 v2
Note: The NAS b2000 v2 is designed to be deployed without a monitor, keyboard,
and mouse. These ports are available and supported by the NAS device, if used.
To initialize the NAS b2000 v2 using the WebUI configuration application:
1. Connect the Ethernet cables to the respective network ports of the
NAS b2000 v2 and the corresponding network segments in accordance with
the information in the "Configuration Information" section in Chapter 2.
2. See Figure 5 and Table 4
NAS b2000 v2.
for the locations of the network ports on the
Configuration Setup
37