Cisco Nexus 3550-T Hardware Installation Manual page 8

Hardware Architecture of the Cisco Nexus 3550-T Triton Switches
Initial 10G Layer 3 Switch Features
• Standard management interfaces: SNMP / TACACS+ / Syslog / JSON-RPC API
• Layer 2 switching features: MAC learning, VLAN tagging/trunking, LLDP, IGMP & STP
• Layer 3 switching features: IP routing, BGP, OSPF, and PIM
• Layer 4 switching features: Static NAT/PAT
The following figure shows the fan-side chassis features that you use when installing the chassis or replacing
its modules.
Figure 5: Fan-Side View of the Cisco Nexus 3550-T Triton Chassis
1
The following figure shows the port-side chassis features that you use when installing the chassis or replacing
its modules.
Figure 6: Port-Side View of the Cisco Nexus 3550-T Triton Chassis
1
Please refer The Cisco Nexus 3550-T Configuration Guide to learn more.
Cisco Nexus 3550-T Hardware Installation Guide
4
Fan modules (1 and 1) 2
Management, Console, 2
and USB ports
Overview
AC power supply (2 and
2)
48 fixed small form-factor
pluggable (SFP+) ports