Assembly - Husky HPRO72MWC20BLK Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the Cabinet Handles
□
Position the Cabinet handle (B) over the holes on the
Cabinet (A).
□
Attach with the Bolts (AA) and tighten with supplied
Hex key
(BB).
□
Repeat this process on the opposite side of
Cabinet (A).
3
Installation of Power Cord
□
Untie power cord located inside drawer.
□
Gently pull cord plug through grommet.
□
Wrap any loose or excess cord around the Cord
Storage Hooks (C).
AA
B
A
after removing the wood pallet and all
CAUTION:
packaging, use the Hex key (BB) or a 12mm socket
wrench to tighten all 16 caster bolts, which may have
become loose during shipment.
2
Attaching the Storage Hook
□
Position the Storage hook (C) over the holes on the
Cabinet (A).
□
Attach Hook (C) using Bolts (AA) and tighten with
supplied Hex key (BB).
Do not over tighten the bolts.
CAUTION:
4
Plastic Plugs
□
Insert the Plastic Plugs (CC&DD) into the remaining
open holes on the side walls of the Cabinet (A) per
the diagram below.
CC
DD
6
C
AA
A
CC
DD