Table of Contents
Advertisement
Quick Links
SKU # 1003 951 493
THD.com # 1003 907 508
Model # HOLT6202B11
USE AND CARE GUIDE
HUSKY 62 IN. ADJUSTABLE HEIGHT WORK TABLE WITH 2 DRAWERS
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-888-HD-HUSKY
HUSKYTOOLS.COM
THANK YOU !
We appreciate the trust and confidence you have placed in Husky through the purchase of this work table. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Husky!
Advertisement
Table of Contents
Related Manuals for Husky HOLT6202B11
Summary of Contents for Husky HOLT6202B11
- Page 1 THANK YOU ! We appreciate the trust and confidence you have placed in Husky through the purchase of this work table. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ............Assembly ............... 2 Safety Information ............Operation ..............2 Warranty ................ Care and Cleaning ........... 3 Pre-Assembly ............Service Parts ..............4 .............. Tools Required 4 ............Hardware Included 4 ..............Specifications 4 .......... -
Page 3: Warranty
The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com. HUSKYTOOLS.COM 3 ... -
Page 4: Pre-Assembly
Pre-Assembly TOOLS REQUIRED Phillips Safety 10 mm 13 mm goggles Wrench Wrench screwdriver HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity Screw M6 x 15L Bolt M8 x 15L Washer M8 5/8 in. Wrench SPECIFICATIONS Maximum capacity (top drawer) 15 lbs Maximum capacity (bottom drawer) 35 lbs... -
Page 5: Package Contents
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Wood top Leg (Right) Crank handle Leveling feet Leg (Left) Top rail Rotating rod Support rail Caster Drawer Slide (pair) Drawer Drawer side panel Back panel HUSKYTOOLS.COM 5 Please contact 1-888-HD-HUSKY for further assistance. -
Page 6: Assembly
(E). Determine the front and back of the top before starting. The front of the wood top (A) has the Husky badge on the edge. Attach the right leg (B) to the wood top (A) as shown using four M6x15L screws (AA). - Page 7 Note: Leveling feet have been pre-assembled on the leg. Caster installation 11. Attach the back panel (M) to the drawer side panels (L) by using two screws (AA) for each side. HUSKYTOOLS.COM Please contact 1-888-HD-HUSKY for further assistance.
-
Page 8: Operation
Assembly (continued) 15. Install the crank handle (C) into the shaft in the corner below the Using two or more people, stand the workbench in its upright wood top as shown. position. Install the drawers using the steps below □ Pull the slides and slide carrier out until fully extended. □... -
Page 9: Care And Cleaning
Windex . □ Do not allow chemicals, water, or other substances to remain on the wood top for extended periods of time to reduce the risk of damage to the wood. HUSKYTOOLS.COM 9 Please contact 1-888-HD-HUSKY for further assistance. -
Page 10: Service Parts
Service Parts Part Description Quantity Wood top Leg (Right) Crank handle Leveling feet Leg (Left) Top rail Rotating rod Support rail Caster Drawer Slide (pair) 10 ... - Page 11 Questions, problems, missing parts? Before returning to the store, call Husky Customer Service 8 a.m.-7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-888-HD-HUSKY HUSKYTOOLS.COM Retain this manual for future use.