GE Profile PSSF3RGZ Owner's Manual And Installation page 31

SCREW DOWN SUPPORT LEG
7
Screw down the support leg until it
touches the floor. This will prevent door
misalignment.
REPLACE THE BASE GRILLE
8
Replace the grille by installing the two
Phillips head screws.
Installation Instructions
31
SET THE CONTROLS
9
Set the controls to the recommended
setting.
START THE ICEMAKER
10
Set the icemaker power switch
to the ON position. The icemaker will
not begin to operate until it reaches
its operating temperature of 15°F (–9°C)
or below. It will then begin operation
automatically. It will take 2–3 days
to fill the ice bin.
Power
switch