Roland EV-1-WL Connection Manual page 4

Connecting the EV-1-WL to
the WM-1D
1.
Connect the WM-1D to your computer,
and set it to STANDARD (Host) mode.
2.
Make sure that the Bluetooth indicator
on the EV-1-WL is blinking white.
If the indicator is blinking blue or is lit up white,
operate the device as shown below to make the
indicator blink white.
Blinking blue
Lit white
3.
Press the [Bluetooth] button on the
EV-1-WL.
The Bluetooth indicator on the WM-1D rapidly
blinks white, and pairing begins.
The Bluetooth indicators on both units stop
blinking and remain lit when pairing is finished,
and the indicator on the WM-1D starts blinking
slowly.
Quickly press the [Bluetooth] button twice
on the EV-1-WL.
The unit is connected to a different device.
Disconnect on the connected device side,
or long-press the [Bluetooth] button on
the EV-1-WL.
4