Vax VRS7W Series Instruction Manual page 5

VRS7W Series User Guide v1.0.qxd:User Guide
IMPORTANT: Maximum water temperature
!
40°C.
Fill the clean water tank with clean water (up to 40˚C).
Replace the measuring cap (Fig 4/4).
NOTE: only use Vax carpet cleaning solution. Using
other cleaning solutions may cause excessive
foaming. Using other cleaning solutions will
invalidate your guarantee.
Fig.4/4
Place the bottom of the clean water tank into the cleaner
and click into place. (Fig 4/5).
Fig.4/5
Plug the cord into an electrical outlet.
Turn the power switch on (Fig 4/6).
Fig.4/6
All manuals and user guides at all-guides.com
'click'
19/5/11 17:58 Page 5
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
The power switch controls the vacuum motor. Press on
the recline pedal and pull the cleaner back into a reclined
position (Fig 4/7).
IMPORTANT: Never leave the cleaner unattended
with the power on.
NOTE: Vacuum carpets thoroughly with dry
!
vacuum cleaner before washing.
Fig.4/7
Whilst pressing solution spray trigger, push carpet cleaner
in a forwards motion. Release trigger and pull unit
backwards in same path to remove dirty water and
solution from the carpet. (Fig 4/8).
Fig.4/8
Repeat if necessary. Empty when the max fill line on the
dirty water tank is reached.
5
operation