Ec Declaration Of Conformity; Defi Nitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DCS320 Manual

Charger
Mains voltage V
AC
Battery type
Approximate min 60
charging time (1.3 Ah)
of battery packs 140
(3.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approximate min 40
charging time (1.3 Ah)
of battery packs 90
(3.0 Ah)
Weight kg
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DCB107
MACHINERY DIRECTIVE
230 V
Li-Ion
70 90
(1.5 Ah) (2.0 Ah)
CORDLESS RECIPROCATING SAW
185 240
DCS320, DCS380
(4.0 Ah) (5.0 Ah)
D WALT declares that these products described
E
0.29
under Technical data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-11
DCB112
These products also comply with Directive
230 V
2014/30/EU and 2011/65/EU. For more information,
Li-Ion please contact D
refer to the back of the manual.
45 60
The undersigned is responsible for compilation of
(1.5 Ah) (2.0 Ah)
the technical file and makes this declaration on
120 150
behalf of D
(4.0 Ah) (5.0 Ah)
0.36
10 Amperes, mains
3 Amperes, in plugs
Horst Grossmann
Vice President Engineering
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
15.11.2014

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a)
b)
WALT at the following address or
E
WALT.
E
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
ENGLISH
31