1369/2017........................37 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
If a tumble dryer is stacked on the top of the washing • machine, make sure to use the correct stacking kit approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation •...
Page 5
ENGLISH the drum to prevent an internal to be replaced, this must be carried damage. out by our Authorised Service Centre. • Always take care when moving the • Connect the mains plug to the mains appliance as it is heavy. Always use socket only at the end of the safety gloves and enclosed footwear.
• Do not put flammable products or • Use original spare parts only. items that are wet with flammable 2.6 Disposal products in, near or on the appliance. • Make sure that all metal objects are WARNING! removed from the laundry.
Page 7
ENGLISH 5. Put the front polystyrene packaging element on the floor behind the CAUTION! appliance. 6. Carefully put down the appliance Do not use alcohol, solvents with the rear side on it. or chemical products. 9. Make sure to identify the different sizes and the positions of the sound barriers.
Page 8
Attach the sound barriers at a room temperature. 13. Pull up the appliance in vertical position. We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 3.2 Installation on suspended 14. Remove the power supply cable and flooring the drain hose from the hose holders.
Page 9
ENGLISH The appliance must be level and stable. Make sure that the inlet hose is not in vertical position. A correct adjustment of the appliance level prevents the 3. If necessary, loose the ring nut to set vibration, noise and the it in the correct position.
Page 10
You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
The tumble dryer can be stacked on the top of the washing machine only by shop or from authorised dealer using the correct stacking kit manufactured and approved by AEG. Only appropriate accessories approved by Verify the compatible AEG ensure the safety stacking kit by checking the standards of the appliance.
Page 12
5.2 Fixing plate kit Read carefully the instructions supplied with the accessory. (4055171146) Available from your authorised dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. 5.3 Appliance overview 11 12 Worktop...
Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code ( Washing phase indicator. It flashes during prewash and wash phase.
Page 15
ENGLISH 7.2 Introduction If you touch the Start/Pause button, the appliance performs the spinning The options/functions are phase and drains the water. not selectable with all The appliance empties washing programmes. Check the water out the compatibility between automatically after 18 options/functions and hours approximately.
Page 16
Use this option to add a pre-wash If you select the Cotton phase at 30 °C before the washing programme at 40°C or 60°C phase. and no other options are set, This option is recommended for the display shows the...
ENGLISH 8. PROGRAMMES 8.1 Programme Chart Washing programmes Programme Programme description Washing programmes White cotton and coloured cotton. Normal, heavy and light soil. Cottons Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, the programme Cottons at 60 °C and the programme Cottons at 40 °C with the option are respectively the «Standard 60°C cotton pro- gramme»...
Page 18
Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2 kg.
Page 19
ENGLISH Programme Default tempera- Reference spin Maximum load ture speed Temperature Spin speed range range 40 °C 1200 rpm 4 kg 40 °C - Cold 1200 rpm - 400 rpm Delicates 40 °C 1200 rpm 1,5 kg 40 °C - Cold 1200 rpm - 400 rpm Wool/Silk 1400 rpm...
ENGLISH You can activate this option: If you deactivate the • After you touch the Start/Pause acoustic signals, they button: all the buttons and the continue operate when the programme dial are deactivated appliance has a malfunction. (except On/Off button ). •...
Page 22
11.4 Check the position of the CAUTION! flap Make sure that no laundry stays between the seal and 1. Pull out the detergent dispenser until the door. There is a risk of it stops. water leakage or damage to 2.
Page 23
ENGLISH With the flap in the In case a selection is not position DOWN: possible, no indicator comes • Do not use on and an acoustic signal gelatinous or thick sounds. liquid detergents. • Do not put more 11.6 Starting a programme liquid detergent than with the delay start the limit shown on...
Page 24
11.10 Interrupting a The programme starts, the door is locked. The display shows the indicator programme and changing the options The drain pump can operate When the programme is running, you shortly before the appliance can change only some options: fills water.
Page 25
ENGLISH 3. Close the door and touch the button • The drum still turns at regular intervals to prevent the creases in the laundry. Start/Pause • The door stays locked. The programme or the delay start • You must drain the water to open the continues.
12. HINTS AND TIPS Special stain removers are available. Use WARNING! the special stain remover that is Refer to Safety chapters. applicable to the type of stain and fabric. 12.1 The laundry load 12.3 Detergents and other treatments • Divide the laundry into: white, coloured, synthetics, delicates and •...
ENGLISH 12.5 Water hardness Use the correct quantity of additive for water softening. Follow the instructions If the water hardness in your area is high that you find on the packaging of the or moderate, we recommend that you product. additive for water softening.
Page 28
13.6 Cleaning the detergent dispenser To prevent possible deposits of dried detergent or clotted fabric softener and/or formation of mould in the detergent dispenser drawer, once in a...
Page 29
ENGLISH WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 1. Open the pump cover. 5.
Page 30
2. Remove the inlet hose from the 11. Put the filter back into the special appliance by loosening the ring nut. guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages. 3. Clean the valve filter on the back of the appliance with a toothbrush.
ENGLISH values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose.
Page 32
The programme was not finished WARNING! properly or the appliance stopped Deactivate the appliance too early. If the alarm code appears before carrying out any again, contact the Authorised Service check. Centre. 14.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket.
Page 33
ENGLISH Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose have floor.
15. CONSUMPTION VALUES Stated values are obtained in laboratory conditions with relevant stand- ards. Different causes can change the data: the quantity and type of laundry and ambient temperature. Water pressure, the supply voltage and the temperature of inlet water may also affect the washing pro- gramme duration.
ENGLISH 16. TECHNICAL DATA Dimension Width/ Height/ Depth/ 600 mm/ 850 mm/ 630 mm/ 660 mm Total depth Electrical connection Voltage 230-240 V Overall power 2200 W Fuse 13 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex- cept where the low voltage equipment has no pro-...
Page 36
3. The appliance starts. Push the On/Off button to turn the At the end of the programme, remove appliance off. the laundry. 17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display.
18. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017 Product Information Sheet Trade Mark Model L6FBG942R, PNC914915016 Rated capacity in kg Energy efficiency class A+++ -20% Energy consumption in kWh per year, based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of...
Page 38
The 'standard 60 °C cotton programme' and the 'stand- ard 40 °C cotton programme' are the standard washing programmes to which the information in the label and the fiche relates, these programmes are suitable to clean nor- mally soiled cotton laundry and they are the most effi- cient in terms of combined energy and water consump- tion.