Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha YZF-R125 Owner's Manual

Periodic maintenance and adjustment
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
6
ZAUM1609
1. Turn signal light bulb
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the turn signal light lens by
installing the screw. NOTICE: Do
not overtighten the screw, oth-
erwise the lens may break.
[ECA11192]
EAU62590
1
1
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screw.
ZAUM1621
1. License plate light bulb socket
2. License plate light unit
3. Screw
2. Remove the license plate light
bulb socket (together with the
bulb) by pulling it out.
3. Remove the burnt-out bulb by
pulling it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by pushing it in.
6. Install the license plate light unit by
installing the screw.
6-35
EAUM3510
2
3