Yamaha YZF-R125 Owner's Manual page 38

For your safety – pre-operation checks
ITEM
Throttle grip
Control cables
Drive chain
Wheels and tires
4
Brake and shift pedals
Brake and clutch le-
vers
Sidestand
Chassis fasteners
Instruments, lights,
signals and switches
Sidestand switch
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip
free play and lubricate cable and grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
• Check operation.
• Correct if necessary.
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer
check vehicle.
4-2
CHECKS PAGE
6-15,
6-27
6-27
6-25,
6-26
6-17,
6-19
6-28
6-28
6-29
—
—
3-20