Before You Begin; Preparation; Water Supply To The Icemaker; Tools You Will Need - GE GSC23KSWSS Owner's Manual And Installation

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.GEAppliances.ca

BEFORE YOU BEGIN

Read these instructions completely
and carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Skill level – Installation of this appliance
requires basic mechanical skills.
• Completion time – Refrigerator Installation
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation
is not covered under the Warranty.
If the refrigerator has already been installed,
remove the base grille (see Step 2 in Moving
the Refrigerator ), then skip to Step 5 in
Installing the Refrigerator .
— Save these
— Observe all
30 minutes
Water Line Installation
30 minutes
Refrigerator
Models 22, 23, 25 & 27

PREPARATION

WATER SUPPLY TO THE ICEMAKER

If the refrigerator has an icemaker, it will have
to be connected to a cold water line. A GE
water supply kit (containing tubing, shutoff
valve, fittings and instructions) is available
at extra cost from your dealer, by visiting
our Website at GEAppliances.com (in Canada
at www.GEAppliances.ca) or from Parts and
Accessories, 800.626.2002 (in Canada
1.800.661.1616).

TOOLS YOU WILL NEED

3/8" and 5/16" Socket
Phillips Head Screwdriver
16
1/2" and 7/16" Wrench
Plastic Putty Knife