Honda CBR1000ST Manual page 172

20200103191036_32MKR8000_eng_BOOK Page 172 Friday, January 03 2020 19:24:26 JST
Adjusting the Drive Chain Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
Shift the transmission to Neutral. Stop the
1.
engine.
Place your vehicle on its side stand on a
2.
firm, level surface.
Loosen the rear axle nut.
3.
Loosen the lock nuts on both adjusting
4.
bolts.
Drive Chain Adjusting the Drive Chain Slack
u
Lock nut
Adjusting plate
Scale graduations
Rear axle nut/washer
Lock nut
Adjusting bolt
Scale graduations
Adjusting bolt
Adjusting plate
Continued
169