Minimize Wear And Avoid Damage - Stihl FS 300 Instruction Manual

English
The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are difficult (very dusty work
area, etc.), shorten the specified intervals accord‐
ingly.
Cooling air inlet
All accessible screws and
nuts (not adjusting
screws)
Antivibration elements
Cutting attachment
Metal cutting attachment Sharpen
Gearbox lubrication
Safety labels
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
see chapter "Inspections and Maintenance by Dealer", section "Antivibration Elements"
27 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this owner's manual.
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
ating and maintenance instructions in this man‐
ual. This includes in particular:
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
78
Replace after every 100
operating hours
Visual inspection
Clean
Re-tighten
2)
Check
Have replaced by serv‐
1)
icing dealer
Visual inspection
Replace
Check tightness
Check
Replenish
Replace

27 Minimize Wear and Avoid Damage

X
X
X X
X X
X
X
– Using the product for sports or competitive
events.
– Consequential damage caused by continuing
to use the product with defective components.
27.1 Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
parts, this includes:
X
X
X X
X
X
X
X X
X
X
0458-579-8721-B