Cadillac CT4 Owner's Manual page 229

Table of Contents

Advertisement

Cadillac CT4 Owner Manual (GMNA-Localizing-MidEast-15283644) - 2022 -
CRC - 7/28/21
vehicle will shift to N (Neutral).
Reduce the vehicle speed and try the
shift again.
To shift into R (Reverse):
1. Bring the vehicle to a
complete stop.
2. Press and hold shift lock release
button on the side of the shift
lever.
3. From the center position, move the
shift lever forward through the first
detent to the end of travel. R is
illuminated in red.
4. After releasing the shift lever, it
will return to the center position.
To shift out of R (Reverse):
1. Bring the vehicle to a
complete stop.
2. Shift to the desired gear.
3. After releasing the shift lever, it
will return to the center position.
At low vehicle speeds, R (Reverse) can
be used to rock the vehicle back and
forth to get out of snow, ice, or sand
without damaging the transmission.
See If the Vehicle Is Stuck 0 213.
N : In this position, the engine does
not connect with the wheels. To
restart the engine when the vehicle is
already moving, use N (Neutral) only.
Warning
Shifting into a drive gear while the
engine is running at high speed is
dangerous. Unless your foot is
firmly on the brake pedal, the
vehicle could move very rapidly.
You could lose control and hit
people or objects. Do not shift into
a drive gear while the engine is
running at high speed.
Caution
Shifting out of P (Park) or
N (Neutral) with the engine running
at high speed may damage the
transmission. The repairs would not
be covered by the vehicle warranty.
Be sure the engine is not running at
high speed when shifting the
vehicle.
DRIVING AND OPERATING
The vehicle is not designed to stay in
N (Neutral) for more than
five minutes. It may automatically
shift into P (Park). N (Neutral) is not
intended for towing. If the vehicle
needs to be towed, see Towing the
Vehicle (Mechanical Shifter) 0 344 or
Towing the Vehicle (Electronic Shifter)
0 346.
To shift into N (Neutral):
1. Move the shift lever forward to the
first detent from the center
position.
If the vehicle is in P (Park),
apply the brake pedal and press
the shift lock release button
while moving the shift lever
forward.
N will illuminate in red.
2. After releasing the shift lever, it
will return to the center position.
To shift out of N (Neutral):
1. Bring the vehicle to a
complete stop.
2. Shift to the desired gear. If shifting
from N (Neutral) to R (Reverse) the
shift lock release button will need
to be pressed.
229

Advertisement

Table of Contents
loading

Table of Contents