Scanning with CaptureOnTouch Lite
CaptureOnTouch Lite is a scanning application that comes pre
installed in the scanner. It can be used on a computer that does not
have the scanner driver installed.
You can follow the instructions on the screen to scan a document and
save the scanned images in any file format.
Scanning Procedure
1
Set the Auto Start switch at the rear panel of the scanner
to ON and then connect the scanner to the computer.
Auto Start
OFF
ON
USB cable
If necessary, connect the power supply USB cable.
2
Open the feed tray and the scanner is turned ON
automatically.
The computer recognizes the scanner as a storage device, and
the [ONTOUCHLITE] icon appears on the desktop.
IMPORTANT
When scanning with CaptureOnTouch Lite, do not close the feed
tray until you have finished saving image files.
3
Subsequently, the following window opens
automatically. Double-click the [CaptureOnTouch Lite]
icon.
CaptureOnTouch Lite starts and the main screen appears.
60