Canon imageFORMULA P-150M User Manual page 48

Hint
• Clicking [Return to main screen] returns to the main screen of
Select Scan Job.
• If a job with the output method set to [Save to folder] was
executed, you can open the folder in which the image file was
saved by clicking [Open storage folder].
Starting Select Scan Job with the Start
Button
If a job is assigned to the Start button of the scanner, you can start
scanning with the job by pressing the Start button.
If you load the document in the scanner and press the Start button,
CaptureOnTouch starts and scanning starts according to the settings of
the assigned job.
Hint
If Select Scan Job is executed from the start button, CaptureOnTouch
ends automatically approximately 5 seconds after the output process
finishes.
IMPORTANT
You must install the Evernote software before selecting it as the
output method. For details on the installation procedure,
Start Button
see 19 page.
48