Chapter 5 Scanning With Captureontouch Lite; Scanning With Captureontouch Lite - Canon ImageFormula R10 User Manual

Chapter 5 Scanning with
CaptureOnTouch Lite
This section describes how to scan when using CaptureOnTouch Lite.
Scanning with CaptureOnTouch Lite................................................ 23
Starting and Exiting CaptureOnTouch Lite ...................................... 27
Operations for the scanned image edit window .............................. 28
Setting the scan mode ....................................................................... 31
Configuration and Functions of the Advanced Settings Dialog
Box ....................................................................................................... 33
Advanced Settings Dialog Box ................................................... 33
Scan Panel........................................................................................... 36
Setting Basic Scanning Conditions .................................................. 36
Function Restrictions Depending on Mode Setting ........................ 39
Setting the output ............................................................................... 41
Environmental Settings...................................................................... 42

Scanning with CaptureOnTouch Lite

CaptureOnTouch Lite is a scanning application that comes pre-
installed in the scanner. It can be used on a computer that does not
have the scanner driver installed.
Click the scan mode and output panels, and then click the [SCAN] button
to scan the document. You can select the scan method according to the
document type and purpose of use before scanning.
Scanning Procedure
1
Connect the scanner to a computer while the operating system is
running.
2
Open the feed tray, turn ON the scanner, and then load the document.
For details, see "Loading a document".
23
Scan mode panel
Output panel