Canon DR-5060F Instructions Manual page 45

The Start Scanning dialog box appears.
4
Set [Feeder] (Duplex or Simplex).
MEMO
If the [Feeder] setting is different from the camera unit in use in the Backup
mode, a confirmation message is displayed when [Start Scanning] is clicked.
(See "Scan Batch to File" P. 27)
5
Set [2LevelBlip]. (See "Separation" P. 65)
6
Load the document on the document tray. (when Feeding Option
is set to [Remote])
7
Click [Start Scanning].
Scanning is started when Feeding Option is set to [Remote].
MEMO
When Feeding Option is set to [Semi Auto], the Start key turns green and
stands by to be pressed. Load the document and press the Start key.
When Feeding Option is set to [Auto], the Start key turns green and stands
by for the document to be loaded. Load the document.
When Feeding Option is set to [Manual], the document tray rises. Load one
sheet.
Scanning and Printing Documents
2
43